Hi, Reader

Welcome to my blog that talk all about radiography and sonography

Wednesday, July 25, 2012

Patient Examination with Bucky Table Fluoroscopy (Spot Film)

Axiom Iconos R100  is the machine that produces x-rays through a tube by using a high-voltage power source is equipped with fluoroscopy to obtain a picture of the anatomical and physiological organ of the body so as to establish the diagnosis . Fluoroscopy is a system that uses the principle of fluorescence to directly see the organs / real time which is then screened through TV monitor.

This procedure to operating this Fluoroscopy type :

  1. Prepare a horizontal machine at the position table, if the machine in a vertical position angle , press table on the examination table or setting of the joystick / remote system in the control table.
  2. Put the tape in position ½ part of the tape simultaneously.
  3. Then Press the button: The multix System selection (unit) and select the spot films are in the control tube.

    clip_image002[4]

  4. Then press the button: on automatic control fluoroscopy table, until the LED lights up.

    clip_image002[6]

  5. After do this,press the button: automatic colimasi three times until the indicator light.

    clip_image002[8]

  6. Press the button: the use of the control grid table.

    clip_image002[10]

  7. Now, the patients are ready to entering in the examination room and do the positioning.
  8. Press the button this button below for the distribution division of the tape cassette according to the desired control table.

    clip_image002[22]

  9. Set the kV settings

    clip_image002[24]

  10. and  then press the mAs settings. The settings manually kV and MAS in the control tube

    clip_image002[26]

  11. Press the screen medium sensitivity settings:
    Automatic settings by pressing the screen medium sensitivity settings.

    clip_image002[14]

  12. Press the selection of focus is large or small:

    clip_image002[16]

  13. Press the selection of the use of tubes of 80%:
  14. Press the X-ray exposure like fidure below . Then checks accompanied by x-ray fluoroscopy, by pressing the control buttons above the table or through the foot control.
    clip_image002[18]Press the button until the indicator lights shown like this button below.:

    clip_image002[20]

  15. The examination have been finished . So lets to take the tape and invite the patient to sit in the examination room to wait for processing films by radiographers in the darkroom.

No comments: