Wallstand Mode Examintaion is the x ray scan mode on AXIOM Iconos R100 Fluoroscopy. To do this please to prepare the examination table in the position of the vertical . If the horizontal position in the state press table angle of the examination table.Or the desk in angle setting table with joy stick control (remote system). And horizontal position of the tube.
- Press the button Table settings in the control table:
- Insert the cassette in the cassette in the Bucky stand, set according to the size of the cassette. Then lets to press the selection multi- x System (unit) and select bucky stand mode. After this Invite the patient come in and do positioning.
- Doing the collimator setting is done through the collimator settings are located under the tube or through a joy stick in the control table (remote system).
-
Then do use the grid: 
- Then press the screen medium sensitivity settings. Automatic settings by pressing the screen medium sensitivity settings.
-
Then Press the choose selection of focus is large or small . Press the selection of the use of tubes of 80%. - Press the X-ray exposure:
- Make checks accompanied by x-ray fluoroscopy, by pressing the control buttons above the table or through the foot control.Until the indicator are have been on. Take the tape and invite the patient to sit in the examination room to wait for processing films by radiographers in the darkroom
No comments:
Post a Comment